Cold pitched roof
• Hydro-vapor insulation Spanizol D: when installing roofs the material is rolled out and cut on the roof rafters. Installation is carried out from bottom to top with horizontal sheets with overlap of 15 cm.
Monday - Friday:
8.00 - 18.00
Нижний Новгород,ул. Федосеенко 6
Monday - Friday:
8.00 - 18.00
Spanizol RM
Spanizol RM is a reinforced water-vapour seal
Spanizol RM is a universal water-vapour seal film characterized by additional polypropylene mesh reinforcement, due to which it received the highest strength. It is intended for building protection against condensate, snow, rain, dampness, fungal infections and corrosion. Waterproofing is UV rated; it withstands huge temperature differences within the range of -60 +80 degrees.
It is manufactured of the polyethylene with addition of the polypropylene without harmful substances. The air gap is required between the material and the finishing decor. The vapour seal film should be laid tightly to the thermal insulation, with a rough surface outward.
Application of Spanizol RM:
Waterproofing in the following structures:
- cement screeds
- concrete and grade floors
- moisture-permeable floors
- basement inter-floor coverings
- increased humidity rooms
Water-vapour seal in elements such as:
- cool pitched roofs
- flat roofs
- inter-floor coverings of cool attic floors
It can be used as a temporary roof.
PRODUCT FORM
Roll width:
1,6 m.Size, m²:
15, 30, 35, 50, 60, 70, 75, 80 m2Temperature range:
from -40 to +80°С
Specifications
| Composition | Maximum tensile force in longitudinal/cross direction, N/50 mm, min | Resistance to vapour permeability, m2/h Pa/mg, min | Waterproofing capacity, mm w.g., min |
UV-stability, months |
| Polyethylene, polypropylene | 399/172 | 7,0 | 1000 | 3-4 |
