svg Нижний Новгород,ул. Федосеенко 6
svg Monday - Friday: 8.00 - 18.00

Spanizol C Eco (water-vapour seal)

Spanizol C is a water-vapour seal

Spanizol C has a two-layer structure: one side is smooth, the other — with a rough surface in order to retain the condensate drops and their subsequent evaporation. Spanizol C is used as a vapour seal in order to protect the insulant and other building components against the saturation of water vapours from inside the room in the structures of walls, heat-insulated pitched roofs and inter-floor coverings.

This product is suitable for flexible metal roof. It provides the vapour seal, wind and moisture protection. It is resistant to ultraviolet exposure and is absolutely water-proof. The film surface is covered with a protective layer of thermal lamination – it can easily withstand strong winds and temperature drops. The advantages of Spanizol C film are the high breaking load and full protection of the roof against metal corrosion.

Spanizol C is also used in the structure of flat roofs as a water-vapour seal. When installing the cement screeds, Spanizol C is used as a damp-proof course when installing the floors on concrete, earth and other moisture-proof underlays, in basement inter-floor coverings and damp rooms. Spanizol C film is installed without insulant, with the hairy side inward. The adhesive strip applied to the film and the markings allow to evenly fix the edges under the most difficult weather conditions, during snow, wind and rain.

PRODUCT FORM

  • Roll width:

    1,6 m.
  • Size, m²:

    15, 30, 35, 50, 60, 70, 75, 80 m2
  • Temperature range:

    from -60 to + 90°C

Specifications

Composition Breaking load in longitudinal/cross direction, N/5 cm, min Resistance to vapour permeability, m2/h Pa/mg, min Waterproofing capacity,
mm w.g., min
UV-stability, months
100% polypropylene 150/95 7,0 1000 3-4

Application of materials

  • Interfloor overlap on beams

    Vapor insulation Spanizol B: for interior decoration, the material is laid with rough (anti-condensation) side outward, and smooth side close to the insulant. It is recommended to maintain ventilation gap between the material and decorative finish of the room in order to

  • Heat-insulated pitched roof

    Super diffusion membrane Spanizol AS, AM, A120: it can be installed directly on the insulant (with white side) without ventilation gap. It is strictly forbidden to use Spanizol AS, AM, A120 as temporary roof covering!

  • Heat-insulated frame wall

    Installation. Super diffusion membrane Spanizol Premium AS, AM, A120: it can be installed directly on the insulant (with white side) without ventilation gap.

  • Interior partitions

    Vapor insulation Spanizol B: for interior decoration the material is laid with rough (anti-condensation) side outward and smooth side close to the insulant.

  • Attic floor

    Super diffusion membrane Spanizol Premium AS, AM, A120: it can be installed directly on the insulant (with white side) without ventilation gap.

Certificates