Sectional elevation (transverse)

Installation

• Super diffusion membrane Spanizol Premium AS, AM, A120: it can be installed directly on the insulant (with white side) without ventilation gap.

• Vapor insulation Spanizol B: for interior decoration, the material is laid with rough (anti-condensation) side outward, and smooth side close to the insulant. It is recommended to maintain ventilation gap between the material and decorative finish of the room in order to ventilate condensation.

• Spanizol C material is used in the same structuresas Spanizol B vapor insulation and the material are installed in the same way. Due to its strength characteristics, it can be used as Spanizol D waterproofing.

• Hydro-vapor insulation Spanizol D: when installing attic, interfloor or basement floors it is used with any type of insulant and mounted close to it. Maintain 5 cm gap between the material and the finished ceiling.

• Spanizol FS material: used as reflective heat-vapor-waterproofing material. It promotes heat removal from the interior. When installing non-insulated roof, it is laid with the reflective side outward. To ensure maximum effect of radiation reflection, the gap of 5 cm should be maintained between the decorative finish.